When inspecting the engine compartment, you should check the belts for tightness. How much play should the belts have?
Up to 3/4 inch. Section 2.1: Check belts for tightness. Belts should not have more than 3/4 inch of play at the center of the belt.
When inspecting the engine compartment, you should check the belts for tightness. How much play should the belts have?
ANSWER BREAKDOWN
- A. Incorrect. The required depth is 3/4 inch, not 1/2 inch. Check belts for tightness. Belts should not have more than 3/4 inch of play at the center of the belt.
- B. Correct. Check belts for tightness. Belts should not have more than 3/4 inch of play at the center of the belt.
- C. Incorrect. The required depth is 3/4 inch, not 1 inch. Check belts for tightness. Belts should not have more than 3/4 inch of play at the center of the belt.
- D. Incorrect. "They should not move at all" is not correct. Check belts for tightness. Belts should not have more than 3/4 inch of play at the center of the belt.
Al inspeccionar el motor, cuanta holgura deben tener las correas?
AUp to 1/2 pulgada(s)
BUp to 3/4 pulgada(s)
CUp to 1 pulgada(s)
DThey should not move at all
Seccion 2.1: Las correas no deben tener mas de 3/4 de pulgada de juego en el centro.
- A. Incorrecto. "Up to 1/2 pulgada(s)" no es la respuesta correcta. La respuesta correcta es "Up to 3/4 pulgada(s)". Las correas no deben tener mas de 3/4 de pulgada de juego en el centro.
- B. Correcto. Las correas no deben tener mas de 3/4 de pulgada de juego en el centro.
- C. Incorrecto. "Up to 1 pulgada(s)" no es la respuesta correcta. La respuesta correcta es "Up to 3/4 pulgada(s)". Las correas no deben tener mas de 3/4 de pulgada de juego en el centro.
- D. Incorrecto. "They should not move at all" no es la respuesta correcta. La respuesta correcta es "Up to 3/4 pulgada(s)". Las correas no deben tener mas de 3/4 de pulgada de juego en el centro.